What You Need to Know Before Ironing
Both the New York Hot Dog Patch and the Portland Multicolor Rain Patch come with a heat-activated adhesive backing. This means you can attach them to fabric with an iron, no sewing required. The process is straightforward, but a few details matter for a lasting bond.
The patches are imported embroidered patches. The New York Hot Dog Patch measures about 1.45" x 3.25", while the Portland Multicolor Rain Patch is approximately 2.75" wide. Both are packed on plastic-free recycled backer cards. All purchases support 1% For The Planet.
How to Iron On Your Patch
For a secure attachment, follow these steps. The exact heat setting and pressing time are not specified by the supplied information, so use a medium-high cotton setting on your iron and press firmly, checking the bond.
- Prepare the fabric: Place the garment on a hard, heat-resistant surface like an ironing board. Make sure the area is flat and wrinkle-free.
- Position the patch: Peel off any backing (if present) and place the patch adhesive-side down on the desired spot. Use a thin cloth or parchment paper over the patch to protect it from direct heat.
- Apply heat: Press the iron firmly onto the cloth-covered patch. Hold without sliding. Lift the iron and let the patch cool for a minute.
- Check the bond: Gently lift an edge to see if it's adhered. If not, repeat the pressing step. For extra security, you can sew around the edges, but this is optional.
Tips for Best Results
Avoid washing or soaking the garment for a period after ironing to let the adhesive fully set. Turn the garment inside out when washing and use a gentle cycle. Do not dry clean or bleach the patch area.
If you're applying the patch to a hat, curved surface, or delicate fabric, sewing may be a better option. The heat-activated adhesive works best on flat, sturdy fabrics like denim, cotton jackets, or bags.
Patch Details at a Glance
- New York Hot Dog Patch: New York Hot Dog Patch by Allison Cole Illustration. Sew on or iron on with heat-activated adhesive. Measures 1.45" x 3.25". This size is great for jacket sleeves, backpack straps, or jeans. The hot dog design adds a playful NYC vibe.

New York Hot Dog Patch - Portland Multicolor Rain Patch: Portland Multicolor Rain Patch by Badge Bomb. Sew on or iron on (has heat-activated adhesive). Measures approximately 2.75" wide. The larger width makes it a statement piece for a tote bag or the back of a denim jacket. The rainy design is perfect for Pacific Northwest fans.

Portland Multicolor Rain Patch



